IDENTIFIKASI KUAT ACUAN TERHADAP JENIS KAYU YANG DIPERDAGANGKAN DI KOTA KUPANG BERDASARKAN SNI 7973:2013

Authors

  • Elia Hunggurami
  • Sudiyo Utomo
  • Beddy Y. Messakh

DOI:

https://doi.org/10.35508/jts.5.2.175-184

Keywords:

Kode Mutu, Kuat Tekan Tegak Lurus dan Sejajar Serat, Kuat Lentur, Quality Codes, Wood Strength, Compressive strength, perpendicular and parallel fiber, Flexural strength

Abstract

According to results of the test, quality code of each woods is: Timber = E14, Spinach = E14, Red Teak = E12, Candlenut wood = E10 and Cassowary = E15.The compressive strength perpendicular to the wood fibers: Timber= 23,00 MPa, Spinach = 31,00 MPa, Teak Red = 9,67 MPa, Candlenut= 8.67 MPa and cassowary= 21,67 MPa. The compressive strength parallel to the wood fibers: Timber = 70,33 MPa, Spinach = 79,33 MPa, Teak Red = 36,00 MPa, Candlenut= 26,00 MPa and cassowary = 50,00 MPa. Value bending strength of wood: Timber= 132,06 MPa, Spinach= 174,66 MPa, Teak Red= 59,64 MPa, Candlenut= 51,12 MPa and cassowary= 110,76 MPa. The percentage value of compressive strength test comparison between the wood fibers parallel investigation against SNI 7973: 2013: Timber= 164,01%, Spinach= 197.80%, Teak Red= 59.57%, Candlenut= 57.00% and Cassowary= 73,61%. Value percentage ratio of compressive strength test perpendicular to the wood fibers are examined against SNI 7973: 2013: Timber= 365.29%, Spinach= 527,12%, Teak Red= 131,54%, Candlenut= 143,64% and Cassowary= 479,20%. Percentage value comparison test between the flexural strength of the wood studied the SNI 7973: 2013: Timber= 312,64%, Spinach = 445,74%, Teak Red = 121,51%, Candlenut= 154,76% and Cassowary= 215.99%.

Downloads

Published

2016-09-30

How to Cite

Hunggurami, E., Utomo, S., & Messakh, B. Y. (2016). IDENTIFIKASI KUAT ACUAN TERHADAP JENIS KAYU YANG DIPERDAGANGKAN DI KOTA KUPANG BERDASARKAN SNI 7973:2013. Jurnal Teknik Sipil, 5(2), 175–184. https://doi.org/10.35508/jts.5.2.175-184

Most read articles by the same author(s)

Obs.: This plugin requires at least one statistics/report plugin to be enabled. If your statistics plugins provide more than one metric then please also select a main metric on the admin's site settings page and/or on the journal manager's settings pages.